Pyle’s new power inverters

  • No load current draw: <0.2Amp – Low voltage alarm: 10.5v+/-0.5v
  • Low voltage shut down: 10.0v+/-0.5v – High voltage shut down: 15.5v+/-0.5v
  • Built-in cooling fan – Input voltage range: 10v – 15.5v (+/-0.5v) – Output voltage: 115V +/-5V
  • Converting efficiency: >85% – Low voltage / high voltage / overload / thermal protection circuitry
  • Continued Power: 1000W – Surge power: 2000W – Dimension: 11.22”L x 6.93”W x 2.95”H
  • Note:PNV2000 1,000W Continuous & 2,000W Peak watts

People spend a ton of time in their cars now days. With Pyle’s new power inverters you can be more productive, have more fun — and use all the electronics you want in your car or truck. Convert 2000 watts 12-volts DC power to 115-volts AC power safely and effectively in your car with the PNV200 Power Inverter. Power cell phone charger, i-Pods, and other elctronics with this safe and convenient product. Item includes a built-in cooling fan and low-voltage/high-voltage/overload/thermal protection.

Buy Now!

List Price: $ 251.99
Price: Too low to display

Eco Pleasant Motor Vehicles From Tesla Motors in Vehicle

Aided by the alarming hazards of global warming round the globe, automobile producers have picked a safer street to hold people within a very much productive pollution much less way. The need for electric vehicles has risen by significantly, and individuals are turning out to be more conscious on contributing on the healthier surroundings. That is why car suppliers have selected to existing a fuel choice that is eco friendly and handy likewise.

Among the renowned auto producers all-around the globe, Tesla Motors has brought ahead their attractiveness -Tesla Roadster. Roadster a battery operated electric vehicle sports activities automobile would be the solitary competent electric vehicle that goes on highways. Tesla holds a document of advertising one,200 Teslas in 28 nations around the world in the calendar year 2010.

Tesla is the foremost electric car or truck that utilizes battery of lithium-ion and also the foremost electric car that may voyage more than 200 miles each charge. A entire world report was made when 501 km with a solo charge was achieved by Roadster in 2009.

In 2010 March Roadster was the very first to triumph Monte Carlo Rally of Substitute Power. The motor vehicle was driven by Erik Comas, Formulation 1 driver and took through 96 competitors in comparison to vary, effectiveness and efficiency.

The characteristics from the vehicle contain:

The physique of the car or truck can be a hand-crafted, carbon fiber substance with executive interiors.

It is the only auto that could provide you with a supercar performance without any tailpipe emissions at all.

This requires no petroleum

It may increase pace from 0-one hundred within a make a difference of just 4 seconds.

It is often plugged into a usual electrical socket and may go on and on using a solitary charge.

This may be the only car or truck that is often charged from wind, pv or hydro strength.

The automobile delivers an addictive driving performance.

The vehicle requires much less maintenance when compared to other automobiles.

Exhaust application and oil alter work isn’t vital.

The organization also gives a home-contact program by which a Tesla ranger will come for the residence or the business office of your client and does necessary program or inspections.

Locking, push-button glove box wrapped in leather

Adjustable, customized-tuned suspension together with the decision of consolation and sport settings

Incredibly dominant and rapid heating air-conditioning and ventilation.

An elective 7-inch feel screen exhibit with assist photographic camera

The engine inside the auto is stated being energized by apower receivercontaining a field calculating approx ten inches vast by 25 inches prolonged by six inches substantial and has 12 stereo vacuum tubes and connects with a 6-foot-long antenna.

The most up-to-date versions have can come out using a more efficient engine and interiors which will charm anybody who will take a take a look at it.

By:
Posted:

Why Fluorescent Lighting Is The Trade Show Light Of Choice in Lighting

For anyone involved in business, the trade show is an essential part of the client-building process: getting out and promoting your wares is far more productive. The problem has always been the size of the venues used to house these events, and the fact that most indoor lights do not have the ability to sufficiently illuminate the desired space. However, one option is a clear favourite of stall owners and exhibitors – fluorescent lighting.

The venues we are talking about are usually vast, warehouse-styled exhibitions centres that are about as large as a football field with roofs that stretch too high to allow a common domestic light to have any worth at all. For this reason, trade lighting is almost a specialist area, with so few options available that can do the job properly. While the fluorescent option has been proven to work well indoors, there are similar problems for outdoor exhibitions and trade shows, which only flood lighting can offer the solution to.

With any trade exhibition, whether is a motor show or an IT services exhibit, lighting is very important. Spotlights are commonly used to highlight special aspects of a product or presentation in the hope of drawing focus onto it as a successful selling point. It may be the sleekly-styled wing mirrors on a new sports car or a crucial statistic relating to the success of a computer program. Regardless of what it is, the stall or stage needs to be lit effectively.

Of course, having a roof that is 50 feet high or a venue whose expanse can result in even grown-ups getting lost, the orthodox methods of lighting are simply not good enough. But the answer has been provided by the common office fluorescent bulb, which can be suspended from the network of metal rafters that typically span the space between an exhibition centres walls.

The drop can vary with most of the suspension kits that accompany these lights reaching 15 metres. But, crucially, the specific position of these lights can be adjusted relatively easily, with the cables that are secured to the metal beams capable of being moved if needed, as the need arises.

This versatility means that the individual stalls below can be catered for, regardless of their actual position. Obviously, this is no good if the quality of light is poor. However, fluorescent bulbs provide a strong, consistent glow that is perfectly capable of brightening the area below it. Their effectiveness is increased by the aluminium reflector that is situated directly behind the fluorescent rod, deflecting upward light back down below.

Of course, some trade shows are held in smaller arenas, with perhaps open walls that leave the venue vulnerable to cross winds and some of the weathers other elements. In this case, a different solution is needed. A Pavia T5 weatherproof fluorescent ceiling light, for example, can be effective. These weatherproof lights are highly durable, enclosed in non-corrosive luminarie and are impervious to moisture, cold and dust. They can be hung from the roof but can also be secured to walls or pillars.

If the trade event is located entirely outside, such as is usually the case at an agricultural show, for example, then the fluorescent option will not suffice. In this case, more powerful lights to counter the effects of poor sunlight, and illuminate a larger area are needed.

Understandably, flood lighting should serve the purpose perfectly, with energy saving lights that are IP65 safety rated ideal given the fact they will have to deal with adverse weather conditions. While all lights of this type can be fixed to a wall, it is also possible to hoist them on temporary stands and position them specifically.

The requirements for efficient trade lighting are very different to those of domestic or enclosed commercial areas, like an office. A different approach is needed, but the results can be highly effective, even by using lights already familiar to the office building.

Even if powerful outdoor lights serve to solve the issues of exhibiting outdoors, fluorescent lighting is clearly the lighting of choice to solve the problems that exist indoors. So long as the suspension cables are long enough and the power is on, then having sufficient light is not something to worry about.

By:
Posted:

{articles-title}

  • No load current draw: <0.2Amp – Low voltage alarm: 10.5v+/-0.5v – Low voltage shut down: 10.0v+/-0.5v
  • High voltage shut down: 15.5v+/-0.5v – Built-in cooling fan – Input voltage range: 10v – 15.5v (+/-0.5v)
  • Output voltage: 115V +/-5V – Converting efficiency: >85% – Low voltage / high voltage / overload / thermal protection circuitry
  • Continued power: 220W – Surge power: 440W
  • Dimension: 6.22”L x 4.33”W x 2.28”H

People spend a ton of time in their cars now days. With Pyle’s new power inverters you can be more productive, have more fun — and use all the electronics you want in your car or truck. Convert 440 watts 12-volts DC power to 115-volts AC power safely and effectively in your car with the PNV200 Power Inverter. Power cell phone charger, i-Pods, and other elctronics with this safe and convenient product. Item includes a built-in cooling fan and low-voltage/high-voltage/overload/thermal protection.

Buy Now!

List Price: $ 102.99
Price: $ 44.84

Why Fluorescent Lighting is the Trade Show Light of Choice

For anyone involved in business, the trade show is an essential part of the client-building process: getting out and promoting your wares is far more productive. The problem has always been the size of the venues used to house these events, and the fact that most indoor lights do not have the ability to sufficiently illuminate the desired space. However, one option is a clear favourite of stall owners and exhibitors – fluorescent lighting.

The venues we are talking about are usually vast, warehouse-styled exhibitions centres that are about as large as a football field with roofs that stretch too high to allow a common domestic light to have any worth at all. For this reason, trade lighting is almost a specialist area, with so few options available that can do the job properly. While the fluorescent option has been proven to work well indoors, there are similar problems for outdoor exhibitions and trade shows, which only flood lighting can offer the solution to.

With any trade exhibition, whether is a motor show or an IT services exhibit, lighting is very important. Spotlights are commonly used to highlight special aspects of a product or presentation in the hope of drawing focus onto it as a successful selling point. It may be the sleekly-styled wing mirrors on a new sports car or a crucial statistic relating to the success of a computer program. Regardless of what it is, the stall or stage needs to be lit effectively.

Of course, having a roof that is 50 feet high or a venue whose expanse can result in even grown-ups getting lost, the orthodox methods of lighting are simply not good enough. But the answer has been provided by the common office fluorescent bulb, which can be suspended from the network of metal rafters that typically span the space between an exhibition centres walls.

The drop can vary with most of the suspension kits that accompany these lights reaching 15 metres. But, crucially, the specific position of these lights can be adjusted relatively easily, with the cables that are secured to the metal beams capable of being moved if needed, as the need arises.

This versatility means that the individual stalls below can be catered for, regardless of their actual position. Obviously, this is no good if the quality of light is poor. However, fluorescent bulbs provide a strong, consistent glow that is perfectly capable of brightening the area below it. Their effectiveness is increased by the aluminium reflector that is situated directly behind the fluorescent rod, deflecting upward light back down below.

Of course, some trade shows are held in smaller arenas, with perhaps open walls that leave the venue vulnerable to cross winds and some of the weathers other elements. In this case, a different solution is needed. A Pavia T5 weatherproof fluorescent ceiling light, for example, can be effective. These weatherproof lights are highly durable, enclosed in non-corrosive luminarie and are impervious to moisture, cold and dust. They can be hung from the roof but can also be secured to walls or pillars.

If the trade event is located entirely outside, such as is usually the case at an agricultural show, for example, then the fluorescent option will not suffice. In this case, more powerful lights to counter the effects of poor sunlight, and illuminate a larger area are needed.

Understandably, flood lighting should serve the purpose perfectly, with energy saving lights that are IP65 safety rated ideal given the fact they will have to deal with adverse weather conditions. While all lights of this type can be fixed to a wall, it is also possible to hoist them on temporary stands and position them specifically.

The requirements for efficient trade lighting are very different to those of domestic or enclosed commercial areas, like an office. A different approach is needed, but the results can be highly effective, even by using lights already familiar to the office building.

Even if powerful outdoor lights serve to solve the issues of exhibiting outdoors, fluorescent lighting is clearly the lighting of choice to solve the problems that exist indoors. So long as the suspension cables are long enough and the power is on, then having sufficient light is not something to worry about.

By: Kathryn Dawson
Posted:

Introducing The BendPak XPR-Series Car Lifts

BendPak Lifts offers a complete range of durable two-post lifts with lifting capacities ranging from 9,000 pounds to 18,000 pounds. BendPak’s rugged car and truck lifts are designed to handle all of your vehicle lifting applications. Our consumers demand uncompromising quality from productive lifts that maximize up-time and get the job done efficiently. That’s why, day after day, our rugged 2-post lifts deliver on a promise of superior performance that our clients have come to expect from BendPak Lifts.

The newest line of BendPak XPR-Series 2-Post car lifts are designed to provide pros and hobbyists alike with a wide selection of durable, safe and reliable systems for virtually every lifting application. Powerful and secure, BendPak’s XPR-9FS in particular has an incredibly rapid lifting speed and a robust menu of features to increase efficiency and productivity, but with fewer serviceable parts and reduced necessary maintenance. The results are lower operating expenses and higher productivity. If you’re looking to do more in less time than ever before, you’ll find that the short-style XPR-9FS automobile lift is the perfect addition to your shop.

This two-post model has the capacity to effortlessly lift some of your largest full-sized pickups and commercial vehicles, yet it still provides specific capabilities for sport and compact cars, both foreign and domestic. The XPR-9FS car lifts are a rugged, open-top model lift with a 9,000-lb. maximum capacity. And when it comes to ease of use, our dual-synchro equalization system and user-friendly controls are the stuff of legends. Some other BendPak XPR-Series exclusives include: 16 individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversized 5″ cable sheaves. And, to better cater to your specific lifting needs, we offer optional specialty arm configurations.



The entire XPR-Series is a reflection of BendPak’s continuing commitment to producing lifts of highest quality, safety and utmost reliability. Featuring the most advanced engineered technology available in the industry, these lifts are built to safety standards well above normal OSHA/ALI/ETL requirements. The XPR-Series car lift includes a wealth of standard and optional features to support the operator’s need for performance and security. Combined with BendPak’s tradition durable construction, the XPR-Series has become the new industry benchmark that others are judged by.

Whatever your specific automotive project requirements are, there’s a BendPak XPR-Series 2-Post Car Lift designed to meet your needs. The XPR-Series is designed around an abundant roster of options and accessories that allow you to fully tailor your auto lift to your unique circumstance. But long before you start looking at options, you’ll be impressed with the long list of standard features and capabilities packed into every BendPak XPR-Series Car Lift.

Bottom line—when you buy BendPak Lifts, you can expect a significant boost in performance and lift operation life expectancy because your BendPak XPR-9FS is built to be the last lift you ever purchase. No one surpasses us in quality and safety—not now, not ever. That’s why when you get a BendPak car lift; you get more than just a great lift. You get peace of mind. That’s the benefit of owning a BendPak Lift.

You can view our complete line of BendPak Lifts XPR-Series Car Lifts on our website http://www.garybloomsales.com. Feel free to contact us at anytime with any questions or comments.

By: 2mgwebsolutions
Posted:

Are There Different Car Lifts And How Do They Differ

Being in the motor industry it is common knowledge that there are different size car lifts. New business owners and also old school service station engineers will all agree car lifts for garages are essential in order to provide a productive and professional service to their prospective clients. The way most engines are and chassis are fitted, accessing the problem from underneath is in most cases the only way, and to have the ease of hoisting the vehicle up is quick easy and stable. Unbeknown to some, the science of car lifts is quite advanced, so to locate what kind of lift is best, one would need some assistance.

A good place to start is to look at your area, if you have a small space, lifts are a great way to be used for working and also for stacking as you use the vertical space nicely and creates a competent flow of work ethic. Different types of lifts include single post, four posts, as well as a single post variety. Being able to adjust to accommodate a weight spectrum between 4000 lbs and 7000 lbs, using hydraulic mechanisms these lifts are adaptable for potable as well as stationary automotive purposes including scissor lifts as well. In larger corporations, equipment types should comprise of stationary and portable power car lifts.

In conforming to safety regulations, all cars are legally obliged to carry in the trunk a portable car lift. Should you become stranded due to a flat tyre or in instances debris is lodges in the chassis. A lift such as the scissor type can be used for helping anybody in need, especially woman.  There are even types of portable ones such as rolling units or the typical stacking type lift.

When browsing and buying car lifts for garages or even for residential use, due to the nature of the mechanics, second hand lifts is often a good bye, you can pick up some really nice ones at places such as liquidation auctions and so on. Without having the requirement of looking and smelling pretty, as long as the used lifts work properly, they’ll do the job and of course save money. On the other hand, new lifts that are for sale are nine times out of ten not badly priced. When dealing in pre owned car lifts, one would just need to be sure that it’s all sound, perhaps get an engineer to do an assessment before you make any movable investments. Naturally if the work load required for your lift is not a lot – perhaps you are using it in a residential capacity, then a second hand option is favorable. Most times in your basement or garage the preferred type is the underground lift. It saves on space which in a home area is very important as most times there is only a small space to work in. Often large corporations don’t have time to explore the fault of a lift and sell if off and they buy in new equipment and in more than half of the occasions, something as simple as the hydraulic valves or the cylinder just needs replacing.

When laying out plans to purchase equipment, its best to consult with a financial advisor so you are able to budget for the right things at certain time periods, as buying everything at once can be a hugely costly exercise. Getting an engineer will also help to pinpoint the right car lift for you. For instance if you have floor space for heavy vehicles but the roof is too low, you may not think of it, but a four post life might be too high and you would need to look out for a parallelogram lift. Another innovative measure you can look into if your budget allows is the benefits of a pallet jack, and in certain service stations that store vehicles, this can really benefit you. A solid plan and grounded investments are sure to benefit you in the future.

By: Lee Andersons
Posted:

Do You Know How Much Business A Bad Automotive Crm System Are Really Costing You?

Hey wait a second a CRM solution suppose to make me money and keep my business organized and productive, how can it cost me money other than the monthly subscription fees. Plus I pay already a hefty amount per month to begin with for our system, it is suppose to be working well. If you are the general manager for your dealership, and what I just described above is something that just ran through your head then you should really, I mean really look into your current CRM solution and verify its usefulness.

CRM is acronyms for Customer Relationship Management, it is suppose to be a system that keeps your dealership running efficiently and help you organize your tasks, customers, appointments and inventory. But poorly designed or developed software can cost you business and money in real life. To design and develop an automotive CRM takes time and talent, with good understanding of the business. There are many providers out there claiming they are in business since the early 80s and they have the best system in the market (which is true back in the 80s, and their software has not progressed for almost 20 years). Don’t be sold into another useless solution again, you don’t have to pay 00-00 per month to use some outdated, unintuitive, poorly designed and developed system, that in actuality can cause you money and business. You don’t get a better system because you are paying for a bigger price tag.

In the world of automotive sales, there is really very little scientific or technical knowledge that is required. By having your staff using a complicated system that requires training will actually hurt your business. Car sales person are not programmers, they are two completely different breed of people. A poorly developed and seemly complex system will result in poor data integrity. And a technical night mare for user mistakes, and technical traps. Imagine if your staff can’t tell you how much your used car in your inventory really cost. Because they don’t understand the system, or they are mis-quoting customer monthly payments due to the poor user interface. And difficult to understand financial calculator.

So the next time you are looking for a CRM system for your dealership please keep in mind you don’t have to pay 00 per month and 00 setup fee just to use something that is less sophisticated than Facebook. And make sure your next CRM solution is actually developed by computer programmers, not car sales person who hired some overseas programmer to produce.

This article is brought to you by Dealer Elite CRM and Dealer Template, you can find us online at http://www.dealerelites.ca or http://www.dealertemplate.ca

By: Rick Li
Posted: