{articles-title}

  • Product Name : Cigarette Lighter Plug;Power : DC 12V
  • Material : Plastic, Metal, Foam;Color : Pink, Black
  • Overall Size : 7.6 x 4.6cm/ 3″ x 1.8″(L*Max.D)
  • Net Weight : 48g
  • Package : 1 x Cigarette Lighter Plug

Universal design fits all vehicles with a standard 12 Volt power source. This exquisite and stunning lighter is the ultimate accessory for your car. It is the best replacement piece for your old or broken ones and will fit most car models. It features plastic construction with Pink Rose Design and black foam base protector.

Buy Now!

List Price:
Price: $ 9.61

{articles-title}

  • Product Name : Car Decorative Antenna;Material : Plastic
  • Size (Approx) : 12.5 x 6.8 x 7.4cm/4.9″ x 2.67″ x 2.9″(L*W*H);Color : Black
  • Net Weight : 59g
  • Package Content : Package Content
  • 1 x Car Decorative Antenna : 1 x Car Decorative Antenna

The Decor Antenna is made of good quality plastic material in black, easy and convenient to install and remove with the double-side tape design.Novel Ornament Antenna is ideal choice to decorate your car, make your car more graceful and trendy.Just for car decoration purpose, not a genuine antenna.

Buy Now!

List Price:
Price: $ 5.24

{articles-title}

  • Product Name : Wire Harness;Fit for : Toyota Camry Corolla Reiz Highlander
  • Total Length : ~93cm/ 36.6″;Material (External) : Plastic
  • Main Color : White, Black
  • Weight : 25g
  • Package Content : 1 x Car Wire Harness

The Car Wire Harness to wire in aftermarket radios, safety and stability, without cutting factory wiring. Plugs directly into cars wiring harness to make installs quick and easy. This is a non-OEM generic product.

Buy Now!

List Price:
Price: $ 7.77

What is the proper way to paint plastic side skirts on trailblazer?

The bottom plastic side skirts on my 2008 trailblazer are gray. I want them white… What is the proper procedure to paint them so
The paint won’t chip away too easy?

Chosen Answer:

It would depend on the material that you will be using.
A) Spray paint use a product like Krylon’s plastic paint the best method without using automotive paint follow the prep for auto paint

B)Automotive paint

Determine if primed by rubbing a hidden area with some 600 grit paper. If the bumper rubs off a coating on your paper (usually black) then it has a primer on it, if the plastic just scratches its a raw plastic (skip the next step).

Test the primer one of two ways depending on your paint.

If you are using waterborne paint press a piece of two inch tape onto the primer then quickly lift away. If any primer has transferred to the tape the primer will need to be removed, otherwise sand according to your paint manufacturers recommendations and refinish.
If you are using solvent based paint, take a rag and rub the primer with reducer/thinner for 30 seconds. If the primer transfers to the rag it indicates a soluble primer that should be removed, otherwise sand according to your paint manufacturers recommendations and refinish.

Clean the raw plastic with soap and water, then scuff and clean it with a grey scotchpad combined with a sanding paste, preferably one designed for use with plastic.Clean your plastic with an approved plastic cleaner. Using regular solvent cleaners can create static and possibly lead to a “flash fire” causing injury.

If you will be baking your paint once finished you should bake it for 20 minutes at this point to bring the mold release agents to the surface. Wipe the bumper again with a plastic cleaner while warm.Scuff again with a grey pad, followed by one more plastic cleaning. Allow to flash for 15-30 minutes before the next step.

Apply a plastic adhesion promoter (or plastic primer) in accordance to the technical data sheet for the product.Apply either a urethane primer, sealer or topcoat directly in according to your paint manufacturers recommendations.

** When refinishing flexible plastics a flexible product or additive should be using in your primer, sealer and clearcoat.
by: poecilotheria metallica keeper
on: 13th May 13

How do I change the battery in my 99 Cadillac STS ?? I lifted up the back seat, but there are “acid hoses”..?

that run through the floor . Its a plastic tube, and I have all these warnings about ACID and stuff….how do I properly take it out.What do I do with these hoses, how do I disconnest them or whatever I need to do ? It’s An AC Delco Professional battery if that matters…..

Chosen Answer:

Don’t let all of the warnings scare you. It’s not all that dangerous. The plastic tube connects to the vents on the battery so that any gas produces when charging the battery gets vented to the outside and not inside the car. the battery in your car is a lead-acid battery that has lead plates submersed in a sulfuric acid/water electrolyte. This is how the automotive battery has been made for many, many years. When a battery is being charged, as in when the engine is running and the alternator is supplying current back to the battery, a small amount of hydrogen gas is produced. Since the battery is mounted inside the car, you do not want those gases to build up inside so the plastic tube routes the gas outside. It is possible to get a small amount of the acidic electrolyte to come out of the vents where the plastic hose is attached. There are no other special precautions that need to adhered to when removing the battery other than do not tip the battery on it’s side or upside down. Always, always, always disconnect the negative battery cable first!! Since all modern automobiles use a 12v negative ground, if you accidentally touch another piece of metal while removing the negative cable, the other piece of metal is grounded since it is part of the car. If you by chance touch the positive terminal to ground with both cables still connected to the battery, you will short out the positive terminal to ground and cause a lot of damage and sparks. I’m not trying to scare you but I must stress the importance of removing the negative battery cable first and not to touch the positive terminal of the battery to ground while both cables are attached to the battery. Simple remove the battery hold down, disconnect the negative then the positive battery cables, remove the plastic tube, and lift the battery out. Place the new battery in, install the hold down, install the plastic tube to the vents, and connect the positive battery cable, then the negative. If you have any other questions or need any more advice, my email option is turned on in my profile.
by: bbking48507
on: 11th March 09

{articles-title}

  • Set yourself apart from the rest with this fast and easy to use Horse Car Badge Set
  • It is made of durable plastic material with silvery finish for great look
  • The Horse Car Ornament Set comes with double sided adhesive tape on the back, just peel and stick
  • Each set contains 2 horse badges; Dimension (Each One): ~10.4(L) x 7(W) x 0.3(T)cm
  • Please use detergent to clean the surface of the target before stick it on

Weather resistant Horse Car Sticker Set is great for decorating your car;
It will adhere to most smooth non-porous surface, such as your car, truck, boat, motorcycle, and any other surface.

Buy Now!

List Price:
Price: $ 4.54

{articles-title}

  • Nitro-Carburized Rod for exceptional corrosion resistance and durability
  • Durable Plastic Rod Guide reduces potential rod abrasion
  • Main Seal provides positive closure for high-pressure gas
  • Stop Collar and Limiting Groove assure precise extended length
  • High-Strength Piston Assembly with Leak-Proof Seal helps prevent fluid leakage around the piston, allowing the fluid to pass efficiently through the piston valving components, providing controlled lift and consistent performance

Millions of vehicle owners rely on gas charged lift supports to lift and hold open trunks, hatches, hoods, and even glove boxes. When these fail, they must be replaced to restore convenience and safety. Max-Lift gas charged lift supports are an exact replacement for worn original units.

Buy Now!

List Price: $ 38.33
Price: $ 14.60

{articles-title}

  • Sturdy blow molded plastic storage case with extra tray.

Quickly and easily tests electronic fuel injection systems on GM TBI, Bosch PFI, Ford TBI, GM PFI, Geo TBI and GM SCPI equipped vechicles.

Buy Now!

List Price: $ 50.22
Price: $ 35.13

{articles-title}

  • Solid chrome plated finish, all metal construction, no plastic or soft pewter parts.
  • Fits standard 2″ trailer hitch receivers, – requires hitch pin that is NOT included.
  • Front plate is 5×3-1/2 inches with a 2-3/4×3″ chrome plated solid metal logo.
  • Wonderful gift item for your favorite NCAA college sports fan.
  • Brand new, top quality, officially licensed NCAA college sports team product.

Trailer hitch cover, fits standard size 2″ trailer hitch receivers. Fast, easy installation and removal as needed. Requires hitch pin – not included. Solid metal for durability with no plastic or soft pewter parts like found on lower quality hitch covers. Officially licensed product. Proudly Made in the USA.

Buy Now!

List Price:
Price: $ 37.95

{articles-title}

  • Paint safe, chrome plated solid metal emblem – can be removed without damge to any surface
  • Not affected by extreme weather, sunlight or car washes
  • Shipped in protective, foam lined, padded, plastic cases
  • Brand new, top quality, officially licensed NCAA college sports team product
  • Wonderful gift item for your favorite NCAA college sports fan

University of Notre Dame chrome auto emblem – 3″ x 2.75″ x .125″ – Made in the USA from chrome-plated metal.

Emblems can be applied to vehicle or any other hard surface with a special automotive adhesive foam 3M tape (included on emblem).

Easy and long lasting attachment: lasts as long as you own your automobile; not affected by extreme weather or car washes.

Paint-safe: emblem can be safely removed without damage to paint or surface if desired at any time and is UV protected.

Buy Now!

List Price:
Price: $ 14.95