Auto Repair Silver Spring Guide in Auto-repair

Major companies in this industry such as Ford, Mercedes, Chevrolet, and Volkswagen provide electronic auto repair guides so that even amateur users can learn a lot about auto repair. Auto repair guides usually tell you how repairs are done on all major parts of an automobile including the brake system, cooling system, electrical system, engine system, A/C-heat system, body and exterior, exhaust system, fuel system, steering and suspension system, and drive train.

Anybody can carry out Do It Yourself Auto Repair, anybody old enough to own a car, and calm headed enough to follow some sets of repair instructions can successfully carry out Do It Yourself Auto Repair. It does not require deep knowledge of engineering or mechanism, just the ability to believe in yourself and follow instructions.

Yes, you can reduce failure or mistakes in your Do-it-yourself auto repairs by following the right guides, by obeying Do-it-yourself auto repair instructions to the letter. These instructions you can get in your auto repair manuals.

It is important to verify whether your car is still under warranty before venturing to repair the car yourself. For cars under warranty, the repair work must be performed by a mechanic or a technician certified by the manufacturer. There are many auto repair silver spring to help you in this regard. The repair in this case is usually carried out at the dealer’s service center. Some manufacturers do not offer to perform repair work and you may have the provision of carrying it out elsewhere. Read your warranty carefully to find out how you can get the repair costs reimbursed.

By knowing the basics, you can perform simple troubleshooting procedures when your car breaks down, instead of sending it to a mechanic right away.

You will not have to spend massive amounts of money just to hire a professional for a simple job you can do yourself, such as adjusting a few loose screws or cooling an overheating radiator.

By:
Posted:

What career do I want, deep inside of my mind?

Hi guys,

I am having trouble choosing a future career. I am a college student, but have not chose the major yet.

I have taken two test, one is MBTI test, and the other one is U&I.

From the tests above, I have talent on the career that deals with the machenical things. But I do not want to end up woking in the factories, etc., because in today’s world, the manufacturing industry does not make the “lots” of money.

In today’s world, the financial and the “corporate administrations”, etc., making loads of money. Plus, I like living in the big cities like L.A. or N.Y., but those manufacturing facilities are located on outside of the big cities.

My question is this; do you recommend any kind of test that reveals what kind of career I want deep inside of my mind?

Chosen Answer:

You don’t have to work in a manufacturing company or small r rural area to do more “realistic” jobs.

There are several other avenues to consider:
-Electronics repair
-Automotive repair
-Warehousing
-HVAC jobs
-Construction
by: dtccareerservices
on: 27th March 07

Comprehensive Auto Detailing Using Advanced Cleaning Machines in Cleaning

The auto detailing industry employs advanced cleaning machines that deal with the specific requirements of cleaning the interiors and exteriors of automobiles. The many applications faced by detailers require that several machines are used in the cleaning process. With that said, we can dive right into the different types of equipment that offer the greatest advantages.

Exterior Auto Detailing
This application calls for powerful machines to blast away stubborn residues. However, it is also important to note that the machines must feature low pressure levels and low flow rates that can not only take complete care of cleaning needs but also ensure that sensitive interior areas of the automobile are protected adequately.

To ensure that the highest cleaning power is achieved, top suppliers now offer advanced wet steam temperatures rising up to 250°F for rapid dissolving of tough residues on automotive exteriors. Wet steam output is considered by industry experts as the perfect way to get the best detailing job done not only comprehensively but also quickly.

The auto detailing industry also relies on pressure to make sure the exterior cleaning of cars is done comprehensively. Some machines can deliver high pressure levels reaching up to 8000 psi. However, for car detailing, it is not necessary or advantageous to use pressure levels in excess of 1500 psi, as it can cause dents and scratches on the surface and even chip off paint. The advanced models available for use in the industry are ideal for cleaning the exteriors such as wheels, engines, and body with their adjustable features.

The flow rate of machines is another important feature auto detailing service owners consider when choosing cleaning equipment for various types of automobiles.

Pressure washers with low flow rates are ideal for car detailing, especially in places with limited drainage facilities. Mobile detailing professionals who do not carry out auto detailing within their facilities also find cleaning equipment with low flow rates extremely useful.

Interior Detailing
Portable steam cleaners are used by professionals in the industry for interior detailing. They are ideal for cleaning steering wheels, dashboards, and spot cleaning upholstery.

Portable steam cleaner machines deliver dry steam output that can reach temperatures up to 386°F. They can easily dislodge dirt, stains, and grime from hard surfaces, as well as small upholstered and carpeted spots while making sure very little water is used. For full interior upholstery and carpet cleaning, consider carpet cleaners or carpet shampooers with low flow technology. These machines offer greater extraction power, greater water flow, and high pressure levels to completely dislodge and remove the toughest stains in carpeting. Better yet, with low flow technologies, car carpets can be cleaned, dried, and ready for use in as little as two hours with this latest car wash equipment.

An Overview of the Different Applications per Machine
The latest steam pressure cleaners can be used for a variety of applications in the car detailing business. These include cleaning engines, cleaning the exteriors, and melting snow and ice. Steam cleaners, on the other hand, are more efficient for hard surface cleaning and spot carpet cleaning. Lastly, for complete carpet and upholstery cleaning results, opt for a carpet extractor.

Using the best auto detailing equipment from reputable suppliers can ensure faster turnover of cleaned automobiles from your facility and improved profitability with limited effort. Powerful and efficient cleaning machines are designed exclusively for the industry.
By:
Posted:

What metals are most automobiles made of?

Give two reasons why this is the metal most widely used in the automotive industry.

Chosen Answer:

Steel, iron, aluminum with a dash of copper (for the wiring).

Strong, durable, light, cheap.
by: pisgahchemist
on: 23rd February 09

The American Automobile Industry – Creating Jobs, Developing Life in Sector

United States boasts of the largest automobile manufacturing and trading sector in the world. Professionals from the auto industry have, over time, rigorously followed a streamlined and efficient method of mass-production, ensuring that a large number of vehicles and related accessories were produced every year. Due emphasis was placed on the quality of the manufactured automobiles as well. Different automobile models are readily available in the American markets, with cars, trucks, SUVs, crossover vehicles and light carriers being some of the major varieties. Popular trade shows like the Orlando International Auto Show also go a long way in providing further thrust to the already booming US automobile sector.

The national automotive sector in America has long been served by the so-called Big Three auto companies – Ford, General Motors and Chrysler. One of the key reasons behind the sustained business successes of these companies has been the continuous product research studies that have been conducted by all the three companies. The importance of keeping a regular tab on the latest innovations and advancements from the automotive sector is not lost on the vehicle manufacturers of the country. Orlando International Auto Show and similar such trade events bring to the fore the technological intricacies that are involved in creating efficient, high-quality and commercially viable vehicles.

Over the years, the importance of the automobile industry has consistently gone up in the US national economy. Currently, this sector alone accounts for around 5 per cent of the total Gross Domestic Product of the country. The employment potential of this sector is high too, with more than 3.3 million people involved in automobile businesses.

A wide range of luxury vehicles are also manufactured in the country. A visit to the International Auto Show Orlando is ideal for anyone wishing to get a comprehensive overview of the different car models that are available in the country.

The automobile industry has a significant role to play in the foreign trade sector of the country too. Vehicles of American make are regularly exported to more than 200 countries all across the globe. Over 2.3 million automobiles are traded in the global markets, fetching revenues in excess of USD 58 billion. An extensive range of high-performance, export-quality cars are showcased at several American automobile shows, including the Orlando Auto Show 2011.

Research studies have shown that automobiles are the second most prized possession for US citizens. In such a scenario, it is only natural that, end users would look for cars that provide an ideal blend of reliability and stylish design features. Keeping the high levels of consumer demand under consideration, manufacturers are constantly coming up with new and innovative motor vehicles and related accessories. At events like the Orlando International Auto Show, several such sophisticated vehicles are displayed to the attendees.

With demand levels in the domestic as well as the international markets escalating at a rapid pace and new vehicle companies also starting commercial operations in the country, the American automobile sector seems poised for greater success in the near future.
 
By:
Posted:

When was plywood 1st used in construction?

It seems it older houses they used planks and no plywood.

Chosen Answer:

Plywood was accepted for construction purposes in 1938. It had been used prior to that, mainly in the automotive industry. The concept of plywood dates back to ancient Egypt and China. Hope this helps.

EDIT: You’re absolutely right about the craftsmanship, propreno. I had to put a beam in the bell tower of a church that was about 125 years old. You couldn’t fit a piece of paper between the rafters and the ridge. All cut with hand saws. It was amazing.
by: woodtick314
on: 24th June 09

Is It Profitable To Outsource Electric Motor Design and Gear Design Jobs? in Contract

Electric motor design and gear design are two important components in all modern automobiles, machinery and equipments that have some kind of mobility in them.  The entire manufacturing industry depends upon these two important components to run their machinery. However, it is not possible for all original equipment manufacturers to produce these components. These OEMs depend upon contract manufacturers to get these important parts.

 Several contract manufacturers in the market undertake jobs given to them by the OEMs.  They deliver the required products as per the requirements of clients.  Outsourcing these requirements of electric motor designs and gear designs to contract manufacturers is a win-win situation for both parties.

To get an efficient electric machine, you need an efficient electric motor design. Different designs for gears and electric motors are required for running different machines. Only an expert engineer can create the perfect product needed by the clients. These contract manufacturers have their own team of expert engineers and part designers who are experienced in creating complex designs and products. Moreover, they offer the most cost effective solutions to their clients. Even small and medium businesses can contract their work to them at affordable prices. It will help them save a lot of money.  

These contract manufacturers have complete infrastructural setups to design and manufacture the products required. They deliver high quality products within the given deadlines.

Thus, OEMs can enjoy the benefits of getting high quality products within the time limit, at the most competitive prices. OEMs can reduce their to-market time with the timely delivery of products. It will help them get an edge over their competitors, improving their reputation in the market. In this way, they will create a loyal customer base for their products.

Outsourcing the jobs can also help streamline the processes through the entire product chain.  OEMs can save the time, energy, and money that would be spent in creating new electric motor designs, and gear design, by themselves. If they outsource the jobs, they need not employ the experts required. In addition, they need not install the specialized machinery and equipments needed for such jobs.  Moreover, they need not allocate a dedicated space. In fact, OEMs prefer outsourcing as they can focus their time and energy on other important tasks and develop their business.

OEMs can place bulk orders for electric motor design and gear design with their outsourcing partners and get handsome discounts on their orders. However, when hiring a contract engineering company, make sure that it is reliable and efficient.  A bad contract company will deliver only defective or low quality products, which could tarnish your image in the market.

By:
Posted:

Mechanical/repair parts you should not buy at a junk yard in Salvage

It seems like the price of everything is going up nowadays, even the cost of mechanical or repair parts. Before the automotive industry was dominated by computing technology and electronics, car repairs used to be cheap and quick; but the same repairs can cost you hundreds of dollars today. One option you have when it comes to getting car parts for your repairs is to use used mechanical or repair parts as opposed to brand new ones.

The good news is that used parts from a salvage or junk yard can be purchased at half of what a new part costs. In addition, most salvage yards are in direct competition with stores that stock new parts, so they have to ensure that the used part they offer is of the best quality. What this means is that salvage yards and junk yards break down cars as soon as they get them to remove the salvageable parts and warehouse them as soon as possible to make sure quality is maintained. These modern junk yards even have computerized inventory, so that finding a part is easy. Essentially, this translates into higher quality used parts for the consumer. However, there are still salvage yards that do not upgrade or make use of the current technology.

Regardless of whether you utilize a modern junk yard or the older pick-a part ones, there are certain parts that you should not get used. For car body parts such as doors and bumpers, for example, salvage yards are great. This is because non-mechanical parts such as these don’t usually come with many failure issues. However, it is advised that those mechanical parts that are directly linked to the safety of your car be purchased new. These parts may include those required as part of your braking system, radiators or water pumps.

If you’re one of those persons who like to restore classic cars, then a salvage yard or a junk yard may be the only option you have to retrieve many of the parts needed. Safety is still an important factor to consider, however, so if you’re doing a full restoration, make sure you have the knowledge or get the information required to ensure any of the used part you get is the best and up to the task. Remember, a salvage yard can be a gold mine, but your safety is most important.


By:
Posted:

Global Specialty Chemicals (2009-2014) in Chemical

Specialty chemicals are used to enhance product performance across various industries, including electronics, plastics, and automotives. These chemicals such as fluorocarbon and cellulosic fibers were first used in the textile industry to enhance softness and stain resisting properties of the fabric. Since then, specialty chemicals were developed for applications in almost all industries. The report analyses and provides market forecasts and estimates for specialty chemicals based on two segments; target applications and functions and covers all major chemicals based on target applications such as advanced ceramic materials, construction chemicals, electronic chemicals, cosmetic chemicals, food additives, pesticides, nutraceuticals agents, printing inks, rubber processing chemicals, textile chemicals and water management chemicals and all major chemicals based on functions, such as adhesives and sealants, antioxidants, biocides, catalysts, corrosion inhibitors, separation membranes, specialty coatings, specialty surfactants, synthetic dyes and water soluble polymers. The report also identifies and analyses market trends, drivers, inhibitors and opportunities in the specialty chemicals market.

The stakeholders of the market will be benefited by key opportunities identified and analyzed in the report. Also, the key players, their developments and strategies have been analyzed and explained in the report.

Market estimates and forecasts

The report provides in-depth market estimates and forecast for the following global specialty chemicals market:

  • Specialty chemicals by application/target market

Includes advanced ceramic materials, construction chemicals, cosmetic chemicals, water management chemicals, oil field chemicals, textile chemicals, food additives and others such as rubber processing chemicals, specialty paper chemicals and imaging chemicals and materials.

  • Specialty chemicals by functions

Specialty chemicals by functions include adhesives and sealants, catalysts, corrosion inhibitors, antioxidants, flame retardants and others such as separation membranes, synthetic dyes, specialty pigments and water soluble polymers.

What makes our reports unique?

  • We provide 10% customization. Normally it is seen that clients do not find specific market intelligence that they are looking for. Our customization will ensure that you necessarily get the market intelligence you are looking for and we get a loyal customer.
  • We conduct detailed market positioning, product positioning and competitive positioning. Entry strategies, gaps and opportunities are identified for all the stakeholders.
  • Comprehensive market analysis for the following sectors:

Construction chemicals, advanced ceramic materials, cosmetic chemicals, electronic chemicals, food additives, imaging chemicals and materials, industrial and institutional cleaners, mining chemicals, nutraceutical ingredients, oil field chemicals, pesticides, plastic additives, printing inks, rubber processing chemicals, specialty paper chemicals, synthetic lubricants and lubricating oil additives, textile chemicals and water management chemicals. We have also analyze manufacturing companies of specialty chemicals.

Key questions answered

Which are the high-growth segments/cash cows and how is the market segmented in terms of market directed specialty chemicals?

What are market estimates and forecasts; which markets are doing well and which are not?

Where are the gaps and opportunities; what is driving the market?

Which are the key playing fields? Which are the winning edge imperatives?

How is the competitive outlook; who are the main players in each of the segments; what are the key selling products; what are their strategic directives, operational strengths and product pipelines? Who is doing what?

Powerful Research and analysis

The analysts working with MarketsandMarkets come from renowned publishers and market research firms, globally, adding their expertise and domain understanding. We get the facts from over 22,000 news and information sources, a huge database of key industry participants and draw on our relationships with more than 900 market research companies across the world. We, at MarketsandMarkets, are inspired to help our clients grow by providing qualitative business insights with our huge market intelligence repository.

source: Market Research Reports

By:
Posted:

Can a Structural Engineer with a PhD and an extensive knowledge of FEA work as an Automotive Engineer?

A structural engineer having his degrees from civil engineering department, with a BS, MS and a PhD and an extensive knowledge of FEA and finite element softwares. But without any experience in the automotive industry. Can he work as a CAE or a Design Engineer in one of the Automotive companies?

Chosen Answer:

I guess it would depend on what area of Automotive design you were wanting to get into. As you well know, there are specialties within the Automotive world. They might not be using you to work on heat transfer problems or machine design, but I imagine that they would certainly have use for you on their structural design side. Designing control arms or springs or even the car’s chassis would all be things I think a structural engineer (from any background) would capable of.

Your understanding of continuum mechanics and finite element analysis is applicable to all types of structures, whether it be a bridge girder, airplane wing, or car axle.
by: Stephen
on: 1st December 12