automative lif rasise a 3500lb car 7ft above floor level if the hydraulic cylinder contain 8in diameter piston?

An automotive LIFOtraisese a 3500lb car 7ft above floor level if the hydraulic cylinder contain 8in diameter piston and a 4in diameter rod,determine the
A. work necessary to lift the car
B. required pressure
C. power if the lift raises the car 10 s
D. Descending speed of the lift for a 10-gpm flow rate
E. flow rate for the auto too descend in 10 s

Chosen Answer:

All these answers based on 8 inch lifting cylinder. You haven’t specified anything about the 4 inch rod so haven’t used that in these answers

a). work = force x distance
work = 3500 lb x 7 ft = 24,500 ft-lbs of work
b) 8 inch diameter piston = area of pi * r^2 = 50.26 sq inches
3500 lb / 50.26 in^2 = 69.6 psi pressure
c) power = work / time = 24,500 ft-lbs / 10s = 2450 ft-lb/ second
(one foot-lb /second = 0.738 watt so –> 2450 * .738 = 1,808 watts of power in SI system)
d) volume of a cylinder = pi * radius squared * height
one gallon = 231 cubic inches
10 gallons = 2,310 cubic inches
V =2,310 cubic inches = 3.14 * 4in ^2 * height
height = 2310 / (pi * 16) = 45.96 inches

So 10 gallons a minute will lift car or descend car 45.96 inches or 3.8 feet a minute

e) Flow rate to descend in 10 seconds instead of a minute is 6 times faster (60 sec a minute / 10 sec) = 6.
6 * 10gpm = 60 gpm
by: biire2u
on: 14th April 10

What career fields can I enter into with a degree in Mechanical Engineering? What is the salary range?

What career fields can I enter into with a degree in Mechanical Engineering? What is the salary range?

Chosen Answer:

There’s a wide variety of fields you can get into with a BS in ME, depending on your interests. You can work in any of the fields previously mentioned like automotive engineering, power generation (boiler and turbine design), aerospace or manufacturing. Within those fields you can look for jobs in basic design, quality assurance, project management or even sales.

Salary range will depend on the location and type of job, obviously. On the low end, you may see offers for around ,000 per year. On the high end, in more expensive cities, you can earn up to ,000 per year. There are of course outliers on either end, but this is the typical range.

With an MS you’d be getting a little more money, about ,000 to ,000 per year and would likely be doing similar work. MSMEs are also commonly hired by large companies to do computational work like FEA (Finite Element Analysis) or CFD (Computational Fluid Dynamics). With a PhD, your starting salary would be in the -,000 range and you’d likely be doing R&D or possibly even forensic engineering in any of these areas. Of course the higher salaries that come with advanced degrees come with the disadvantges of more time in school and lost wages (not earning any money while you’re in school).

Hope this helps.
by: Prometheus
on: 15th May 07

Know More on E-commerce Fulfilment and Automotive POS in E-commerce

Electronic commerce or E-commerce can be referred to as the process of buying and selling of goods and services on the internet. Therefore, it is important to have an E-commerce site where one can involve in buying and selling activities. A very important factor which requires careful attention is timely delivery of goods and services. Actually, timely delivery is very important because delay in delivery can cause hindrances in the progress of the organization. E-commerce Fulfilment is the one of the ways by which delays in delivery can be minimized.

E-commerce Fulfilment provides a complete solution to the trading of goods and services area. These services are used by almost every organization due to their advantages of accuracy and reliability offered by them. The work area of E-commerce Fulfilment ranges from receiving goods, to storing, shipping and delivering them to the doorsteps of the consumer. With the use of this electronic E-commerce Fulfilment process it has become easier to trade all around the world. This online method of buying and selling of goods and services through mails and services provides a new dimension to the business concerns. E-commerce Fulfilment can be applied to the fields of wholesale services, retail business auctions and information portals.

E-commerce Fulfilment company is highly dynamic in nature and provides individual attention to every work done. They are very helpful to the business concerns in attaining their business objectives. E-commerce Fulfilment company ensures that the products reach their destination safely and on time. These companies are excellent in their services because they are professionals and perform all their activities with full dedication.

Automotive POS is said to be the most comprehensive software in the auto industry.

It is an automotive repair software program which is complex as well as very useful at the same time. Automotive POS is very useful for an organization involved in automotives because it helps in taking care of complete automobile. Automotive POS software is used by many leading global automotive brands. With the help of this software it is possible to locate orders online and you can get the benefit of predetermining stock quantities during a certain period of time.

It is very well known that each customer is different from the other and their needs vary, therefore the vehicle producers are providing compact services. Thus, Automotive POS is very essential to take care of the needs of the customers. The various functions offered by the Automotive POS are point of sale check out, inventory control, customer loyalty, etc. Point of sale checkout is very fast and easy to use. Under inventory control it reduces or eliminates shrinkage, takes care of stock outs, best and worst selling products as well as keeping record of inventory movement. Automotive POS also takes care of the customers by keeping their records about who they are, what are they buying, detailed sales history and vehicle service records.

Thus, E-commerce Fulfilment and Automotive POS both are really beneficial to the business concerns in their respective fields.

Can one dryclean/ wetclean by oneself the interior of a car?

I’m too broke to go to a proper carwash specialist!

Chosen Answer:

It’s no problem. Places like WalMart, Target, and automotive stores sell the detergents with the brushes on the cap that are meant to clean car upholstery and carpets. It’s basically carpet detergent in a special bottle. After you apply the detergent and do a second or third pass with clean water, you wet vacuum, and you’re finished
I did my aunt’s car interior and the results were good. Let the spendthrifts go to the auto detailers and pay 0.
by: Bruce Almighty
on: 23rd January 08

What is the difference between auto mechanic and automotive service technician?

Chosen Answer:

It is like the difference between a Garbage Collector and a Sanitation Engineer
by: Robert
on: 13th March 12

Environmental And Crazy With The 10 Fastest Green Cars – Green Cars, Sports Car, Audi – Automotive in Car

Dodge E85 Viper sports car are proving environmental protection, sports car drivers and farmers can turn in friends. Chicago’s SVS Power Corporation designed and manufactured Zheliang green sports car, the Dodge Viper is an ordinary gasoline engine sports car made from a blueprint, using bio-ethanol gasoline (from 85% ethanol and 15% of the petrol allocation made there are now a number of gas stations to supply).

1, Dodge Viper E85 E85 Dodge Viper sports car

the emergence of environmental protection that, car drivers and farmers can turn in a good friend. Chicago’s SVS Power companies design and manufacture of a Zheliang green sports car, it is to ordinary petrol engine sports car Dodge Viper a blueprint made from the use of bio-ethanol gasoline fuel (from the 85 percent ethanol and 15 percent of the petrol allocation made there are now a number of gas stations to supply).

Dodge Viper E85

SVS company selected the 2005 version of the Dodge Viper sports car, the car’s engine already has a very strong, and they gave this displacement of 8.3 liter V10 cylinder engine fitted with two turbo system, and adjust the engine can use bio-ethanol gasoline in the state.

The final product has been licensed to run the road, beast speed reached a maximum power output of 1,200 horsepower, the maximum road speed of up to 220.7 mph (about 355 kmh), is also the one break modified version of Viper sports car gasoline engine to maintain the highest speed recorded.

Power: Ethanol Gasoline

Top speed: 220.7 mph (about 355 kmh)

2, No. inspiration steam cars Stanley steam locomotive No.

maintained in order to break 101 years of steam power car top speed record, new British production of steam-powered cars about to get all things proceed. According to its unique shape it up vividly named “inspired number”, if it is very streamlined alternative appearance were not enough, then we look at it as long as the family tree on the clear, “inspiration” and the the world’s first car broke the sound barrier in the car – the twin jet engines ThrustSSC supersonic car from the same gate, so it is not the role of a good mess.

No. inspiration steam car

Zheliang single-seater racing shell made from carbon fiber and aluminum, the engine will water with liquid propane injection into a steam generator, which allows instant pressure 500 pounds per square inch, gushing steam temperatures up to 725 degrees Fahrenheit. The energy was then poured into a two-stage steam turbine engines, to speed up transfer of 12,000 per minute. The result is Zheliang very light car can reach 300 horsepower, it can easily reach 200 mph (about 322 kmh) over the speed limit. If all goes according to plan, then, “inspired number” trial run next year in Utah Boliweier salt Tan.

Power: steam (via liquid propane)

Top speed: estimated at 215 mph (about 346 kmh)

3, 999 Ford hydrogen fuel cell cars

Ford Motor Company developed the 999 hydrogen fuel cell vehicles may not be for the main purpose of the recent production, but as a vehicle to explore the feasibility of environmentally friendly hydrogen fuel cell project, 999 cars were very representative. This car is also the world’s first hydrogen fuel cell car powered sports car, named it as “999 type”, to commemorate the 1904 Henry. Ford made the fastest time run on the world car – 999 cars.

999 Ford hydrogen fuel cell cars

999 Ford hydrogen fuel cell cars is the collective wisdom, it is designed by the Ford Motor Company, from Roche sports car assembly manufacturing company, Pollard Dynamic Systems offers a fuel cell module. The motor vehicle up to 770 horsepower from a group of Ohio State University engineering students designed and manufactured, this group of designers backing is not small, they are designed “Ohio bullet” was battery-powered cars in the United States in 2004 created Boliweier high-speed 315 miles per hour, and now they are being designed by Ford with the help of dye battery-powered “Ohio bullet 2” car.

Power: Hydrogen fuel cell

Top speed: 207 per hour .3 Mile (about 333 kmh)

As diesel fuel, especially biodiesel environmentally friendly fuel of the pioneers of environmental protection, the German luxury carmaker Audi AG in automotive sector have drawn much attention, especially recently, Audi will be a strong unit of the gasoline engine sports car R8 converted into the history of the most powerful bio-diesel drive sports car – Audi R10TDI car. Audi R10 TDI cars

This Audi sports car’s top super-green in front of past criticisms gradually turned into praise. This sports car power 650 bhp 5.5-liter, twin-turbo unit with direct injection-type V12 cylinder engine, has been in almost all aspects of the overall ahead of its predecessors. In a special bio-diesel fuel formula test race, R10 easily broke the 200 mph straight-line track speed record, and won the Le Mans 24 hours in 2006-2007 Rally Championship. Now it seems, not only those clunky, slow diesel trucks dedicated fuel instead.

Power: bio-diesel

Top speed: 204.5 miles per hour (about 329 kilometers per hour)

5, Toyota Prius hybrid car

In breaking 100 miles per hour speed record of hybrids, the Toyota’s own production of the Prius hybrid car in the United States Boliweier become the world’s fastest hybrid power car.

Toyota Prius hybrid car

Car hybrid control system is installed, 1.5-liter four-cylinder gasoline transmitter and 50 kW DC motor, Toyota’s group eventually reached a higher fuel utilization and 500 to 550 volt transformer conversion capability. In our view, the Toyota Prius hybrid car suspension is very low, smooth wheel like the moon, rounded, a top speed of 130 miles form hybrid car can almost be “sexy” to describe.

Relative to the price of 104,000 US dollars of Lexus L S60 0hL type 483 horsepower V8 hybrid car, the Prius is not the speed of what, LS600hL type of speed reached 170 mph. But do not forget, Prius in the United States to create 130 miles per hour


What metals are most automobiles made of?

Give two reasons why this is the metal most widely used in the automotive industry.

Chosen Answer:

Steel, iron, aluminum with a dash of copper (for the wiring).

Strong, durable, light, cheap.
by: pisgahchemist
on: 23rd February 09

Why are there so many inadequate, green lifestyle solutions aimed at the consumer lately?

Wouldn’t limiting the vast amount of industrial and/or automotive – related pollution that is generated on a daily basis have a far greater impact than anything that any one person could possibly do? This sounds to me like the concept of recycling – companies still manufacture almost everything out of cardboard and plastic without fail which almost always winds up in the trash rather than in recycling boxes – and even if it is in a recycling box, many refuse/disposal companies appear to handle it in the same way as garbage… It makes more sense to make change at the source rather than trying to make some kind of small impact at the consumer-level… If the various existing environmental groups truly care about their planet, I am quite sure that they could enact laws that would have a far greater impact than these inadequate solutions… I challenge these groups to work more assertively on enacting proper legislature to make the effective changes that are required.

Chosen Answer:

Be careful what you ask for. You may just get it.
by: Helmut
on: 24th April 07

Updates in Engine Repair in Tampa in Engine

Thirty years ago, the average life span of an automotive engine was about 5 – 7 years. Now the situation is entirely different.

While most engines before develop several problems such as loss of compression, oil pressure, and power, as well as increased emissions, internal noise, and oil consumption after an average of 60,000 to 80,000 miles, engines nowadays have been developed to decrease fuel wash down dilemmas and oil dilution in the crankcase.

Nonetheless, that is not to say that there is no need for engine repair in the roads of Tampa today. Frankly, engine repair is an auto service that certainly won’t be passé in any auto repair shop in Tampa. It may be true that today’s engine technology have extended the life of an engine to such extent that the need for various auto service has been reduced. Nevertheless, these new engines of today will get old and will need engine repair sooner or later.

As a car owner, you need to make a decision when faced with a major engine repair scenario: do you replace the engine or have it rebuilt? Choosing the former will lead you to answer question. That is , are you replacing your engine with a new, remanufactured, or used one?

Obviously, a new engine is very expensive. And if you are on a tight budget, you may opt to just choose between a remanufactured engine or a used one. Do not worry. You are not the only one using remanufactured or used engines. These types of engines are still pretty safe to use as long as it has been worked on by credible mechanics from a reliable auto repair shop in Tampa.

The second option is having an engine rebuild. Engine rebuilds in Tampa also cost less than having a total engine replacement.

However, before an engine rebuild takes place, you must first know that your car engine is rebuildable; meaning there is no excessive wearing and serious damage.

Engine rebuild as an auto service requires no state of the art tools and technology. A mechanic from an auto repair shop normally uses automotive hand tools, gauges, torque wrench, and ring expander and compressor. However, there are some machine work that needs to be done for an engine rebuild and you may need to farm it out from the nearest auto repair shop.

When it comes to buying engine parts, it will save you more money if you go for an engine kit rather that individual packages. Aside from these extra dollars in your savings account, going for a whole engine parts kit reduces your chance of mismatching parts that can ultimately cause major auto service problems. Parts present in the kit include bearings, camshaft, rings, timing chain and gear set, gaskets, valve seals, oil pump, pistons, and lifters.

Engine rebuild costs differently depending on the auto repair shop who does the work. You may opt to choose the one offering auto service at lesser price. However, make sure you do not compromise quality over one’s price. Also remember that the best auto repair shop in Tampa is the one offering good warranty services. As they say: warranty is your guarantee for the quality.



When was plywood 1st used in construction?

It seems it older houses they used planks and no plywood.

Chosen Answer:

Plywood was accepted for construction purposes in 1938. It had been used prior to that, mainly in the automotive industry. The concept of plywood dates back to ancient Egypt and China. Hope this helps.

EDIT: You’re absolutely right about the craftsmanship, propreno. I had to put a beam in the bell tower of a church that was about 125 years old. You couldn’t fit a piece of paper between the rafters and the ridge. All cut with hand saws. It was amazing.
by: woodtick314
on: 24th June 09