{articles-title}

  • NEW – Retail
  • 1-Year Warranty
  • Pyle pl1590bl
  • Pyle Pl1590bl 15 1400w Car Audio Subwoofer Sub 1400 Watt

Description:

&#9The future of computer connectivity is here with mini-USB cables from Cables To Go. These fully rated universal serial bus cables provide transfer rates up to 480Mbps, depending on USB version, and easily attach to any mini-USB device. Mini USB cables are designed to connect from your USB port on Hub, PC or Mac to your USB device, including cellular phones and PDAs. Foil and braid shielding reduces EMI/RFI interference, and twisted-pair construction helps reduce cross talk thus ensuring high-speed, error-free data transfer. Meets all the UL requirements for communication cabling, and is compatible with USB 1.0, 1.1, and 2.0.

Features:

  • Connector: USB Type A Male to Type Mini B 5-pin Male (MD Type)
  • Transfer rates up to 480Mbps depending on USB version
  • Make plug and play connections with cellular phones, MP3 players, digital cameras and PDAs
  • PC and Mac compatible
  • Connect a peripheral with a 5-pin mini usb port to an USB Hub or USB port on PC/Mac
  • Compatible with USB specifications 1.0, 1.1, and 2.0
  • Technical Information:

  • Product Description – USB cable – 6.6 ft
  • Type – USB cable
  • Length – 6.6 ft
  • Connector(s) – 1 x 4 pin USB Type A – female
  • Connector(s) (Other Side) – 1 x 5 pin mini-USB Type B – male
  • Compliant Standards – USB / Hi-Speed USB
  • Package Type – Retail

  • Buy Now!

    List Price:
    Price: $ 51.90

    {articles-title}

    • Receiver has BD – DVD – CD player and FM Tuner
    • Connections – HDMI Out – 1; Video Out – 1; Digital Input – 2 (optical); Audio Input – 1 AUX (Stereo Mini Jack, 3.5mm)
    • Speaker System – Front Configuration – 2-way 3-speaker, Bass-reflex Woofer – 1-3/8 x 4 Cone Type x2
    • Pure Direct Sound Speaker – Yes (front, center)
    • Advanced Bamboo Cone – Yes (front, center) Approximate Dimensions –

    Two Channel idgeable Amplification Tri-way Configuration:1/2 Channels 2 X 500 Watts Total Output @ 4 Ohms 1000 Watts Total System Output @ 4 Ohms Variable Gain Control MOSFET Pulse Width Modulated Power Supply 2 Ohm Stereo Stable Built-In Variable Subwoofer Crossover High Level Low Impedance MOLEX Input Connector RCA Low Level Inputs Speaker Output Terminal Strip Signal/Noise Ratio 90dB THD Less Than 0.04% Frequency Response:15Hz-30kHz Overload Protection Thermal Protection Short Circuit Protection Power On LED Indicator LED Diagnostic Condition Indicator Automotive Type Fuse Protection Dimensions: 7.28-Inch L 9.45’W 2.09-Inch H

    Buy Now!

    List Price: $ 126.99
    Price: $ 41.90

    {articles-title}

    • NEW – Retail
    • 1-Year Warranty
    • sa pb417x
    • Pyle Pb417x 1000w 4 Ch Car Audio Amplifier Amp 4 Channel 1000 Watt

    Description:

    &#9PB417X:

      &#9

    • &#9Four Channel Bridgeable Amplification
      &#9
    • &#9

    • &#9Tri-way Configuration:4/3/2 Channels
      &#9
    • &#9

    • 捸 Watts Total System Output @ 4 Ohms
    • &#9

    • &#9Variable Gain Control
    • &#9

    • \ Ohm Stereo Stable
    • &#9

    • &#9RCA Low Level Inputs
    • &#9

    • &#9Signal/Noise Ratio: 90dB
    • &#9

    • &#9THD Less Than 0.04%
    • &#9

    • &#9Frequency Response: 15-30kHz
    • &#9

    • &#9Overload Protection
    • &#9

    • &#9Thermal Protection
    • &#9

    • &#9Short Circuit Protection
    • &#9

    • &#9Power On LED Indicator
    • &#9

    • &#9LED Diagnostic Condition Indicator
    • &#9

    • &#9Built-In Variable Subwoofer Crossover
    • &#9

    • &#9Speaker Output Terminal Strip
    • &#9

    • &#9Automotive Type Fuse Protection
    • &#9

    • &#9MOSFET Pulse Width Modulated Power Supply
    • &#9

    • &#9Dimensions: 9.84” L 10.03” W 1.96” H
    • &#9

    • ^ x 35Watts Total Output @ 4 Ohms
    • &#9

    • &#9High Level Low Impedance MOLEX Input Connector

    Buy Now!

    List Price:
    Price: $ 57.00

    Audio Visual Jobs Are Hot And Getting Hotter in Audio-visual

    Right now, engineers with advanced training in audio and video technologies are commanding impressive salaries and enjoying rapid advancement up the professional ladder.

    These are not your daddys audio-visual jobs. We are not talking about the kind of job that involves turning the knob on the filmstrip projector in the back of the grammar school classroom. We are not talking simply about the guy who sets up the video projector in the meeting room before the board meeting. Instead, we are talking about the person who understands how handheld devices, personal computers, and projection units combine audio and visual technology to deliver unprecedented communications and entertainment experiences. We are talking about a prestigious, well-paid professional position at the cutting edge of the technology industrys most rapidly-expanding segment. As the internet and television converge, professionals with sophisticated knowledge of audio and visual engineering will lead consumer electronics companies.

    Audio Visual jobs in product development.

    Although the engineers, designers, developers, and marketers at Apple and Google probably would not appreciate being called the audio-visual squad, the term would fit. Most often working in inter-disciplinary teams, high-powered professionals designed the iPhone 4 and Google Android to deliver state-of-the-art audio and visual. The person who integrated audio and visual capabilities into compact handsets played the pivotal role in bringing the products off of the drawing tables and into the market. As the competition between the two digital giants intensifies, audio visual jobs will multiply geometrically. Especially, visionaries should apply.

    Product development also includes design, graphic artistry, and coding for new games. Several leading art schools now offer majors that integrate graphic arts with information technology, so that you enjoy opportunities to develop cutting-edge websites or to contribute to the booming game industry. For the first time, in 2009, computer gaming passed Hollywood movies as the industrys biggest revenue generator; since then, the gap between computers and old fashioned movies has widened considerably. Skilled game designers will be in high demand for as long as adolescent boys love their Wii systems, PlayStations, and X-Boxes. Even more in demand: composers with computer skills. If you have special command of the audio in audio-visual, your path may lead wherever you choose.

    Audio-visual jobs in application and installation.

    In order to climb out of the industrial-age morass and join the post-modern information revolution, many businesses are retro-fitting their offices with fully integrated systems, combining cellular, computer, and audio-visual technologies into all of their workstations, digitising all of their communications and operations. Video-chats are replacing traditional meetings and presentations; Apple Computers facetime application promises further to revolutionise business communication. With your command of audio-visual technologies, you are in a position to guide these companies as they race into the twenty-first century.

    Audio-visual jobs in architecture and design.

    New buildings of all kinds must accommodate and integrate audio-visual technology. Right now, Intel is working on gesture recognition software for household use. In the very near future, the all solar/all wind powered house with voice and gesture recognition will begin appearing in housing tracts around the world. The industry will need architects and interior designers with special talent for designing user interfaces, so that people and their houses can interact. Similarly, automotive technology depends more and more on voice activated systems, and automotive safety products now represent some of the most advanced audio visual engineering in the consumer market. You can emerge as a leader in the next generations of these products if you apply today for any of hundreds of audio-visual jobs.

    By:
    Posted:

    {articles-title}

    • Kenwood KFC-6983PS 900 watts 6×9″ 4-Way Speakers
    • 6×9″ 4-Way Performance Series Car Speakers
    • RMS Power Handling: 220 watts per pair (110 watts each)
    • Urethane foam surround
    • 2-3/4″ Water-resistant paper cone mid-range

    Pair of New Kenwood KFC-6983PS 900 watts combined (450 each) powerful four-way car audio speakers with sound image enhancer
    Features:

    Kenwood KFC-6983PS 900 watts 6×9″ 4-Way Speakers
    Sound Image Enhancer 4 technology
    6×9″ 4-Way Performance Series Car Speakers
    Peak Power Handling: 900 watts per pair (450 watts each)
    RMS Power Handling: 220 watts per pair (110 watts each)
    Frequency Response: 66-22,000hz
    Polypropylene cone woofer with diamond array pattern
    Urethane foam surround
    2-3/4″ Water-resistant paper cone mid-range
    1-3/16″ PET Balanced dome tweeter
    1/2″ PET Dome super tweeter
    New Technology which blends sound for clean musical reproduction
    4 ohms impedance
    Depth: 3-1/16″
    Includes Speaker Grilles

    Buy Now!

    List Price:
    Price: $ 58.99

    {articles-title}

    • RE Audio RTPRO8D4 RT PRO 8D4 8″ 200 Watt RMS Dual 4 Ohm Car Subwoofer
    • 210 Watts RMS
    • Santoprene Rubber Surround
    • High Temp 8-layer Copper Voice Coil
    • FEA-optimized Motor Structure

    RE Audio RTPRO8D4 RT PRO 8D4 8″ 200 Watt RMS Dual 4 Ohm Car Subwoofer
    210 Watts RMS
    Mica Filled Poly Cone
    Santoprene Rubber Surround
    Pressed Steel Basket
    High Temp 8-layer Copper Voice Coil
    FEA-optimized Motor Structure
    Single Magnet
    Linear Conex Spiders
    Rubber Gasket
    Nominal Impedance: Dual 4 Ohm

    Buy Now!

    List Price: $ 159.99
    Price: $ 44.95

    {articles-title}

    • 18 AWG
    • Length: 50 Ft
    • Clear PVC design
    • Oxygen free
    • Blue / Clear wire

    50 Ft. of professional grade 18 Gauge speaker wire by Audiotek. Perfect for any home stereo, DJ and car audio installations!

    Buy Now!

    List Price:
    Price: $ 9.99

    I have $50,000 is this enough to open my own custom car shop up?

    If I have to i would start off small, with just selling car audio, installing stero systems, doing window tinting.

    is this profitable?

    any tips or idea for more stuff to do in the shop?

    thanks for any help

    Chosen Answer:

    Detroit…..

    First you need to contact vender’s of Performance Automotive products. Ask about being a dealer for their products. They will at no charge to you, come to your business and set up a display of their products, manifolds, carburetors, headers, chrome tail pipes and 1,000 or more products………set up in your business for free.

    These products are “On consignment” which means when you sell a product, they will replace it and bill you in a monthly billing. Which means….

    You collect the money for the product and installation and pay the bill next month…..”Holding the money for their products for the month is called a business “FLOAT.” (private financing)

    If products sit in your display area, it does not cost you anything….and gives a lot of expensive decoration, for a custom shop.

    Things like Headers, you can send out to a muffler shop for installation and add to the price for your profit. The muffler shops will greatly discount their labor, so You can make money. (So will Carb. shops, and Mechanics Shops for heads and manifolds, and Nos products.)

    Lift kits and Lowering kits are not that hard to install and are hard to find “ON THE SELF” to buy right now.

    I would include at least two “Automotive Pen-stripe displays”
    That will bring in the body shop guys…..and they will send you radio and window tinting work.

    There is no charge for these products, usually monthly a driver will come by and replace the products sold that month to keep their display full, and send you a bill at the end of the month.

    The more products you stock….The more interest your business will generate. The different manufacturers will have monthly special and include your business and address in the advertisements in news papers and hot rod magazines for free.

    Oil filters, oil, air filters, “custom air filters” and on and on.

    Deck out your business with national products line and it will turn in to profits before you know it. And it will cost you nothing to do that!

    So get going on asking about dealer information for national products and manufactures.

    So you will need a “Proforma” ( what your business should make in the first year) and a single sheet “Personal Financial Statement.”
    If you can’t bull-shit up a good looking financial statement, ask for help from the SBA…”score” guys.

    Keep the paper work simple and neat….it will sell it self.

    Use the 50K your flashing around…..just for that, “flashing around” and to pump up your finical statement and “cash flow pro-forma”

    That will give you 1) a great looking business 2) extra cash across the counter occasionally 3) listing in National publications and local publications, and most of all 4) creditability.
    Then “Dude” you can install your window tint and radios like you would had anyway!

    But this way it will be doing with a future….and “Class.”

    You don’t need any employees, as you can contract out each job to others or other shops.

    When you get a fair amount of work in a line of products then you can hire an employee and do the work “IN HOUSE.”

    If you look around there are hardly any stores that stock a full line of “custom” intake manifold for HOT RODDERS with a complete set of carburetors new in the box. I would include the 671 AND 471 “Blower” products and the install parts.

    Just having that hanging on a wall will give you a lot of traffic for Hot Rod guys. No shops do that…..so if some one is looking for that product…..Your shop will be the place to Go!

    In a 4,000 sf shop, I would use the front 2000 sf just for display and sales. The “rodders” toy shop what ever they need in new products…..no mail order….sell it over the counter. Right Now…cash in the register!

    So Keep your MONEY in the bank…..if you think you will need it……get a job instead. The business will pull its own weight and more…….”If you got lots of stuff to sell!” and you still have the radio’s and custom speakers and window tint, you can contract with “new car dealers” to do all their work including boom boxes for new cars.

    When a new car is sold, people want extras….the dealership don’t supply or install them…..they send it out to shops like yours……and you bill the dealership.
    The dealers will keep you busy…..if you advertise, you may be to busy to service the real money customers “the dealers.”

    Well Detroit……are you that slick, to pull off some simple business tricks……
    If you think it won’t work….walk in Wall Mart, Wall Mart does not own nothing in their stores…..the manufacturers stock their shelves…….not wall mart….
    All Wall Mart has is the Building, the Name, and Cash registers. Their tire shop is just a space “Wall Mart leases out to discount tires shops”

    Wall Mart just collects the money! All the products are owned by the manufactures. Every grocery store in America operates the same way…..Toys or Us…its the same.

    That is the way its done, Detroit….. and it cost you nothing.

    Then when you go to the bank next year for a loan to build you own building…..List all the free inventory and the prices and tell them you have “X Million” dollars in inventory and you would like funds to build a new building.

    Those turkeys will drive to your house to get you to borrow the money from them….instead of other banks.

    IN the real world “Credit is just for dumb People with Jobs!” Not business people.

    Its not what you do…….its “How you do it!”

    A tint shop…thats good…..but why not a Tint Shop with a free Million dollar inventory….and some “cash sales” on the side!

    Its cost……EXACTLY THE SAME!

    So, What ya think….. You got the Nuts, to pull it off?

    Its up to you…….

    (Houston)
    by: math.merlin
    on: 24th April 08

    {articles-title}

    • 7″ TFT Monitors With Built in Car Headrest (ONE PAIR)
    • Built In IR Transmitter so it can work with wireless headphone
    • Crystal Clear picture quality: Resolution 480 x 3(RGB) X 234
    • Two Audio Inputs
    • Two Video Inputs so you can connect more monitors

    Tan Color: Pair (2 PCS) OF 7″ TFT Wide screen Monitor built in Car headrest with the new technology of the Touch buttons, Built in IR transmitter, The rods are adjustable which make these monitors uniiversal so it can fit any car. Comes along with two wireless remote control.

    Buy Now!

    List Price: $ 175.99
    Price: $ 109.65

    {articles-title}

    • 4-channel car amplifier
    • 500W max
    • 130W x 2 bridged @ 4 RMS (4 stable in bridged mode)

    Sports Series amplifiers offer great performance value for listeners who want to improve their existing audio system.

    Buy Now!

    List Price: $ 180.00
    Price: $ 90.00